A look at recent ECU repair, diagnostic and remapping jobs. More photos are added as new work comes in.
The Bosch EDC7UC31 engine ECU and WABCO VCM were read and programmed, the original data was backed up, and the completed solution was verified with the vehicle starting and running successfully.
Read the Iveco Eurocargo Case Study
Original data was recovered from the water-damaged ECU and transferred to a compatible donor ECU prepared for installation.
Read the SEAT ECU Case Study
Another ECU programming job completed on this Kia Ceed 1.6 CRDi fitted with a Bosch EDC17C08 ECU. Software work carried out: - EGR-related software support where suitable - DPF-related software support where suitable - ECU programmed successfully Common symptoms on these vehicles can include DPF warning lights, frequent regenerations, loss of power, limp mode and EGR-related fault codes. All ECU programming is carried out using professional bench programming equipment to keep the process controlled and reliable. Based in Carrick-on-Suir, covering Tipperary, Kilkenny, Waterford and surrounding areas. Message with your vehicle registration and fault codes for advice.
Another BMW E60 visited for EGR-related fault investigation and software support. While working on the vehicle, it was clear there was another fault causing white smoke and rough running. Many garages replace EGR valves, injectors or other parts without confirming the actual cause. Proper diagnostics can identify the real fault before money is wasted. This vehicle received: - EGR-related software support where suitable - ECU health check - Fault code assessment - Advice on the next diagnostic steps
2011 Ford Focus 1.6 TDCi completed for an EGR-related issue. The ECU was programmed on the bench and the work was checked before handover. Work completed: - EGR-related software support where suitable - ECU bench programming - Vehicle returned to use Common EGR-related symptoms include engine warning lights, limp mode, poor acceleration, rough running and excessive smoke. Based in Carrick-on-Suir, covering Tipperary, Kilkenny, Waterford, Clonmel and surrounding areas.
This Peugeot arrived with an AdBlue fault and only 250 km remaining before the engine would no longer start. The vehicle was diagnosed, programmed where suitable, rechecked, and returned the same day. Common warning messages include emissions fault, starting impossible in a set distance, AdBlue warning and SCR system fault. Do not leave these faults until the countdown reaches zero. Based in Carrick-on-Suir, covering Tipperary, Kilkenny, Waterford, Clonmel and surrounding areas.
Mini Cooper D 1.6 diesel completed for a DPF-related issue. The ECU was read, the required software work was completed, and the modified file was written using bench programming equipment. Typical DPF symptoms include warning lights, frequent regenerations, loss of power and limp mode. Contact us with your vehicle details and fault codes before booking. Carrick-on-Suir, covering Tipperary, Kilkenny, Waterford and surrounding areas.
This Audi A5 2.0 TDI came in with an AdBlue fault after previous repair attempts had not resolved the warning. After diagnostics, the ECU was removed and programmed on the bench. A full backup was taken, the required software work was completed, and the file was written back to the ECU. Modern AdBlue systems can be expensive to repair, and persistent warnings should be checked properly before parts are replaced.
VW/Audi/Seat/Skoda Continental PCR2.1 ECU completed. These ECUs are not always straightforward because many PCR2.1 units require unlocking before tuning or software work can be carried out. Services available include PCR2.1 unlocking, bench/boot programming, ECU repair and cloning, DPF/EGR/AdBlue fault investigation and software support, Stage 1 remapping, diagnostics and fault checking. Common on many 1.6 TDI VW, Audi, Seat and Skoda models. Based in Carrick-on-Suir, covering Clonmel, Waterford, Kilkenny, Callan and surrounding areas. Motorsport, off-road or export use where applicable.
2011 BMW E90 318d completed for EGR and intake-related software work after fault checks. Completed via bench programming and explained for the customer's intended use. Based in Carrick-on-Suir, covering Clonmel, Kilkenny, Waterford, Callan and surrounding areas.
2011 Audi A6 2.0 TDI completed for DPF and EGR-related fault support. All work was carried out with specialist tools, verified on the bench and discussed for the customer's intended use. Service area includes Carrick-on-Suir, Clonmel, Kilkenny, Waterford, Callan and nearby towns.
A donor ECU was programmed for a BMW E90 325d after data could not be transferred from the original unit. The job included immobiliser/EWS work, DPF and EGR-related software support, intake-related software work and a Stage 1 tune. Proper diagnostics and preparation are critical for these complex cases. We serve Carrick-on-Suir and the wider South East region.
BMW FRM Replacement & Coding
2008 Audi A4 2.0 TDI completed for Stage 1 remapping, hardcut limiter, DPF software work and EGR software work. Based in Carrick-on-Suir, covering Clonmel, Kilkenny, Waterford, Callan and nearby areas. Message with your vehicle details for advice and booking.
2015 BMW 520d completed for DPF, EGR and intake-related fault support. Work completed via bench programming and explained for the customer's intended use. Based in Carrick-on-Suir and serving nearby areas including Clonmel, Kilkenny, Waterford and Callan.
2010 Opel Insignia 2.0 CDTI ecoFLEX completed for DPF, EGR and glow-plug fault code support. The vehicle was checked and programmed where suitable for the customer's intended use. Operating from Carrick-on-Suir and covering Clonmel, Kilkenny, Waterford, Callan and surrounding towns.
2011 Peugeot 207 1.4 HDi completed for DPF and EGR-related fault support. All work was performed using professional bench programming equipment and explained for the customer's intended use. Serving Carrick-on-Suir, Clonmel, Kilkenny, Waterford, Callan and nearby areas.
Send your details today for a free consultation. We'll provide clear advice before any work is carried out.
